Soundmaster Power Amplifier K4600 (4600W)

Soundmaster K4600 4600W  Power Amplifier 

Soundmaster Power Amplifier K4600 (4600W) is engineered to deliver exceptional performance and
reliability with low distortion, low noise, and high power headroom.
Advanced Class D technology maximizes efficiency to reduce power
consumption and heat dissipation. An internal universal power supply with
power factor correction ensures consistent performance with varying
line voltages.

Configurable & Controllable
The AMP-4600 delivers 600 watts per channel into 4 or 8 ohm “Lo-Z”
loads. Each channel is individually configurable via software for use with
“Hi-Z” distributed speaker systems (either 70V or 100V). Adjacent pairs of
channels may be configured for stereo or bridged operation. Stereo mode
enables remote control of a stereo pair of speakers using a single set of
controls. Bridged mode allows two channels to be combined to provide a
single channel delivering up to 1200 watts into 8 ohms.

Each output channel can be independently configured to throttle the
amount of power delivered to connected loudspeakers. Power throttling
can be used to protect connected loudspeakers from receiving too much
power.

The power throttle can also be used for output load balancing. This is
useful when mixing different loudspeaker types on adjacent channels
such as a subwoofer that requires continuously high power versus a high
frequency compression driver with a much lower power requirement.
Using Power throttle, the output of the amplifier is provisioned to match the
loudspeaker and line drive requirements. Amplifier gain is
automatically adjusted such that a 0dBu input will yield the selected power
throttle output level. No matter the gain from head-end equipment
feeding the amplifier, power throttle will consistently provide an extra level
of loudspeaker protection and overall system optimization.

Fully Protected
The AMP-4600 features comprehensive protection against overheating,
shorted or overloaded speaker lines, excessive signal levels, and other
faults. Each channel is independently protected, allowing an individual
channel to enter protection mode without interrupting the operation of
other channels. Protection is automatic, quickly disconnecting the speaker
line and shutting down the affected channel, and then restoring normal
operation once the fault is resolved. Clear indication of any fault is provided
on the front panel, and may also be reported to a control system to provide
notification on a touch screen or mobile device, through a text message
or e-mail, or at a central help desk using Crestron Fusion software or the
Crestron XiO Cloud service.